Peco, electrics, motors & associated parts, | Main Station

Home Products Brands Dealers About Us Contact Us Register Login

Main Station - Online Model Train Store


Model railway products direct to your door.
Buy through your local Dealer. [ SELECT A DEALER ]


You have 0 item(s) in your wagon.

[ view wagon ] [ checkout ]
Product Categories > electrics > motors & associated parts
Filter products by:    brand    scale   



PL-10

Peco - Standard Turnout Motor The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco Turnout. Requires a rectangular hole 40mmx 24mm [ read more ]
 $22.95 (NZD)

PL-10E

Peco - Turnout Motor with Extended Operating Pin This is the motor to use if you do not wish to cut a large hole in your baseboard, a 9.5mm hole will allow the operating pin to move the tie-bar. Recommend use with a PL-9 Mounting Plate [ read more ]
 $22.95 (NZD)

PL-10W

Peco - Turnout Motor for Low-Amperage Power Supply Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. [ read more ]
 $22.95 (NZD)

PL-10WE

Peco - Low-Amp Turnout Motor with Extended Operating Pin This version combines the low current coils of the PL010W with the PL010E's extended drive pin. [ read more ]
 $23.95 (NZD)

PL-11

Peco - Side Mounted Turnout Motor Designed to clip onto the side of a Setrack or Streamline OO/HO Code 100 Turnout.This motor eliminates the need for cutting or drilling holes in the baseboard and comes with colour coded wires already attached. The unobtrusive design allows the unit to sit... [ read more ]
 $29.95 (NZD)

PL-12

Peco - MOTOR ADAPTOR BASE (with Spring) [ read more ]
 $9.95 (NZD)

PL-12X

Peco - Motor Adaptor Bases 2 per pack To mount Peco Turnout Motors above the baseboard (spring not included). Wherever access under the baseboard is not possible, this Adaptor Base with extension link allows the turnout to be operated from the trackside. [ read more ]
 $5.95 (NZD)

PL-13

Peco - Accessory Switch for PL-10 motor A useful and inexpensive switch, easily fitted underneath a PL010 Series Turnout Motor. Provides single pole changeover switching for the frog. A very neat and compact solution, particularly when the Motor is being used in 'direct drive' mode below the... [ read more ]
 $10.95 (NZD)

PL-17

Peco - Switching Probe A simple yet effective method of switching turnouts. Studs (item PL-18) located on a track plan are wired to motors which are operated by touching the appropriate stud with the probe which carries the 16v ac power supply. Suitable for use with a Capacitor Discharge Unit... [ read more ]
 $13.95 (NZD)

PL-18

Peco - Studs and Tag Washers for use with PL-17 Probe (not included) When located on a track plan, these studs are wired to motors which are operated by touching the appropriate stud with the probe (PL-17) which carries the 16v ac power supply. Suitable for use with a Capacitor Discharge Unit... [ read more ]
 $8.95 (NZD)

PL-26B

Peco - Passing Contact Changeover Switch with Black Lever Provides the short burst of current required to operate the PL010 Turnout Motor. An invaluable advantage of the PL026 switch over the PL017 'probe and studs' method is that the lever remains in the 'last-used position' to give an... [ read more ]
 $20.95 (NZD)

PL-26R

Peco - Passing Contact Changeover Switch with Red Lever Provides the short burst of current required to operate the PL010 Turnout Motor. An invaluable advantage of the PL026 switch over the PL017 'probe and studs' method is that the lever remains in the 'last-used position' to give an... [ read more ]
 $19.95 (NZD)

PL-26W

Peco - Passing Contact Changeover Switch with White Lever Provides the short burst of current required to operate the PL010 Turnout Motor. An invaluable advantage of the PL026 switch over the PL017 'probe and studs' method is that the lever remains in the 'last-used position' to give an... [ read more ]
 $20.95 (NZD)

PL-26Y

Peco - Passing Contact Changeover Switch with Yellow Lever Provides the short burst of current required to operate the PL010 Turnout Motor. An invaluable advantage of the PL026 switch over the PL017 'probe and studs' method is that the lever remains in the 'last-used position' to give an... [ read more ]
 $19.95 (NZD)

PL-34

Peco - Wiring Loom for PL-10 Turnout Motor2 looms per pack Makes wiring the PL-10 series motors quick and easy. Just a simple push fit onto the motor terminals, while the other ends are tinned and ready for a screw terminal block. No soldering required. [ read more ]
 $17.95 (NZD)

PL-35

Peco - Capacitor Discharge Unit For use with all solenoid type motors PL-10 series, PL-11 etc... Connect the unit to the 16v AC supply on your transformer. The capacitor in this unit stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time. [ read more ]
 $51.95 (NZD)

PL-50

Peco - Turnout Switch ModuleFor use with PL-26 series switches (not included) Holds 3 switches as is, or easily expandable with removable ends that allow additional PL-51 Module Add-ons. Push-button wiring system! push to open, release to close and lock wires in place. [ read more ]
 $64.95 (NZD)

PL-51

Peco - Switch Module Add-OnFor use with PL-50 Turnout Switch Module Simply remove end of PL-50 and plug in add-on unit. Holds switches from the PL-26 range (not included). [ read more ]
 $19.95 (NZD)

PL-8

Peco [G-45] Turnout Motor Mounting Plate Enables an LGB Turnout Motor to be fitted to a Peco Turnout. Fixings and full instructions Included. [ read more ]
 $12.95 (NZD)

PL-9

Peco - Turnout Motor Mounting Plates 5 per pack Base unit for use with the PL-10E Motor. Fixing screws and full instructions included. [ read more ]
 $9.95 (NZD)

PLS-100

Peco - SmartSwitch Set Digitally-Controlled Servo System Starter Set Setting up is easy as all connections to the SmartSwitch board simply plug together or attach to screw terminal blocks (no soldering needed) Programming is easy and full, plain-English instructions are included with each... [ read more ]
 $210.94 (NZD)

PLS-125

Peco - Single Servo Motor Digitally-Controlled Servo System Can be easily fitted above or below the baseboard to operate turnouts or other accessories such as signals, crossing gates e.t.c... [ read more ]
 $50.95 (NZD)
Main Station - Online Model Train Store
03 341 8621 / 53 Treffers Road, Chch, NZ
Terms and Conditions | Shipping Info | Request Product
Web development by Synapse