electrics, sundry, | Main Station

Main Station - Online Model Train Store


Model railway products direct to your door.
Buy through your local Dealer. [ SELECT A DEALER ]


You have 0 item(s) in your wagon.

[ view wagon ] [ checkout ]
Filter products by:    brand    scale   



379-480

Graham Farish [N] Wired Power Clip [ read more ]
$11.95 (NZD)

PL-20

Peco - Track Isolating Switch Clip either side of an insulation gap on Peco Streamline OO/HO track. Particularly useful for isolating sections of fiddle yards without the need for any wiring. [ read more ]
$8.95 (NZD)

PL-21

Peco - Four Pole Double Throw Toggle Switch A toggle switch, essential when using the N gauge SLE383F Scissors Crossover. Also useful around the layout in any situation where up to four circuits require switching simultaneously but must remain isolated from each other. [ read more ]
$41.95 (NZD)

PL-22

Peco - Single Pole On/Off Switch Use this switch to isolate sections of track or to switch accessories on and off. This switch will fit in the PL-27 Switch Console and PL-50 Turnout switch module [ read more ]
$18.95 (NZD)

PL-23

Peco - Single Pole Changeover Switch Use this to switch current from one device to another such as the lamps of colour light signals. Two switches can be ganged together and wired to reverse the polarity of motors etc.This switch will fit in the PL-27 Switch Console and PL-50 Turnout switch... [ read more ]
$18.95 (NZD)

PL-24

Peco - Switch Joining Bars 6 per pack This allows adjacent switches to be ganged together and operated simultaneously.compatible with PL-22, PL-23, and PL-26 range [ read more ]
$6.03 (NZD)

PL-27

Peco - Switch Console for Lever Type Switches Six bay moulded plastic console. Compatible with switches PL-22, PL-23, and PL-26 series. [ read more ]
$11.95 (NZD)

PL-31

Peco - Metal push-on Terminal Connectors and Plastic Shrouds 10 Connectors and 5 Shrouds per pack Easy to use, no soldering required. These connectors make modification and fault-finding so much easier than soldered wiring. [ read more ]
$8.95 (NZD)

PL-37

Peco - Cable Clips (self adhesive) 20 per pack Keep your wiring organised and tidy. With these self adhesive clips you can avoid the need for nails in your baseboard. [ read more ]
POA

PL-38B

Peco - Blue Connecting Wire 16/0.2mm 3 amp, 7 metre length The vital link. Your model railway will be so much easier to extend and maintain if you adopt some sort of colour coding for the wiring. [ read more ]
$7.95 (NZD)

PL-38BK

Peco - Black Connecting Wire 16/0.2mm 3 amp, 7 metre length The vital link. Your model railway will be so much easier to extend and maintain if you adopt some sort of colour coding for the wiring. [ read more ]
$7.95 (NZD)

PL-38G

Peco - Green Connecting Wire 16/0.2mm 3 amp, 7 metre length The vital link. Your model railway will be so much easier to extend and maintain if you adopt some sort of colour coding for the wiring. [ read more ]
$10.95 (NZD)

PL-38R

Peco - Red Connecting Wire 16/0.2mm 3 amp, 7 metre length The vital link. Your model railway will be so much easier to extend and maintain if you adopt some sort of colour coding for the wiring. [ read more ]
$7.95 (NZD)

PL-38Y

Peco - Yellow Connecting Wire 16/0.2mm 3 amp, 7 metre length The vital link. Your model railway will be so much easier to extend and maintain if you adopt some sort of colour coding for the wiring. [ read more ]
$7.95 (NZD)

PLS-120

Peco - SmartSwitch Board Digitally-Controlled Servo System This board supports up to 4 Servos (available separately PLS-125), which enables the system to be expanded to suit any size layout. Each control board needs its own 12V DC supply. [ read more ]
$97.95 (NZD)

PLS-130

Peco - SmartFrog Digitally-Controlled Servo System This module will change the polarity of a live frog when the servo moves the blades. (One Smartfrog needed for each Electrofrog, also Module requires separate 12V DC power source.) Other functions include switching LEDs on a control panel... [ read more ]
$39.95 (NZD)

PLS-135

Peco - Stationary Decoder Digitally-Controlled Servo System This module makes it possible for the SmartSwitch to be operated by a DCC controller. Easy to programme and compatible with most brands of DCC control systems. [ read more ]
$48.96 (NZD)

PLS-140

Peco - Cable Extension Pack Digitally-Controlled Servo System Two 1m cable extensions with plug sockets. Two packs required when extending your system with an extra SmartSwitch Board and Four extra Servos. [ read more ]
$16.95 (NZD)